iMacMini

  I regard the iMac G4 as the most beautiful personal computer ever produced. I thought it tragic that such a work of art should slip into...

Well, after making the problem substantially worse, I ended up getting everything working perfectly! It turns out I did have a few of the ...

So I replaced the black cord, cutting it right before it gets to the connector going into the LCD display. I had quite a hard time getting t...

Well I got it working. The problem was that I had both of the 5V via 1Kohm resistor lines going through one resistor. I split it, used t...

As you can see, I had a little bit more success today. I used my makeshift power supply and hooked up my inverter using JBerg's pinout...

So, thanks to JBerg's most helpful and correct comments in my previous post, I indeed had my wiring all messed up. Because the pinouts...

Once the new screen arrived, I got right to work on DVI solder prep. To start, I removed the shrink wrap holding the two video wires tog...