It's straight to the multimeter in the morning.
Sunday, June 5, 2011
So Close!
So I replaced the black cord, cutting it right before it gets to the connector going into the LCD display. I had quite a hard time getting the 4 groups of wires needed for the 17" through the neck, but after an hour or so, managed to pull it off.
Once I got everything wired back up, I hooked it all up and turned it on. The good news is, no weird signal interference. The bad news is, I think I mixed something up...
It's straight to the multimeter in the morning.
It's straight to the multimeter in the morning.
Subscribe to:
Post Comments (Atom)
Wise choice. The black cable is not worth the frustration. It looks like for one of the channels the + and - may be reversed, but certainly easily fixable. Congrats on nearly completing this.
ReplyDelete